EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
Détails du produit
Lieu d'origine: Chine
Nom de marque: Anjeka
Certification: ISO9001-2015
Numéro de modèle: Je vous en prie.
Conditions de paiement et d'expédition
Quantité de commande min: 25KG
Détails d'emballage: 25kg/tambour
Délai de livraison: 3-5 jours
Conditions de paiement: L / C, T / T, Western Union, D / P
Capacité d'approvisionnement: 100 tonnes/mois
Nom chimique: |
Polyacrylate |
Densité: |
0,90 - 1,10g/cm3 |
Point d'éclair: |
>150℃ |
Point de fusion: |
<0℃ |
Odeur: |
Faible |
Solubilité: |
Soluble dans l'eau |
Densité de vapeur: |
Sans objet |
Pression de vapeur: |
<0,01 mPa·s (20°C) |
Viscosité cps (25℃) :: |
25 - 500 |
Indice d'acidité (mg KOH/g) :: |
2 à 40 |
Valeur d'amine (mg KOH/g) :: |
1 - 20 |
Ingrédient actif (%) :: |
50 |
Nom chimique: |
Polyacrylate |
Densité: |
0,90 - 1,10g/cm3 |
Point d'éclair: |
>150℃ |
Point de fusion: |
<0℃ |
Odeur: |
Faible |
Solubilité: |
Soluble dans l'eau |
Densité de vapeur: |
Sans objet |
Pression de vapeur: |
<0,01 mPa·s (20°C) |
Viscosité cps (25℃) :: |
25 - 500 |
Indice d'acidité (mg KOH/g) :: |
2 à 40 |
Valeur d'amine (mg KOH/g) :: |
1 - 20 |
Ingrédient actif (%) :: |
50 |
DESCRIPTION
Anjeka 6070 is a macromolecule wetting and dispersing agent, and used for water-borne coatings,
printing inks and adhesives. It is a standard additive, which is used for binder-free pigment concentrates.
Suitable for all pigments.highly effective wetting and dispersing agent specifically designed for use in various applications, including coatings, inks, adhesives, and other formulations. It is known for its ability to improve pigment dispersion, reduce surface tension, and enhance the overall performance of the system.
PRODUCT DATA
Composition
Solution of a nonionic polymer with pigment affinic groups.
Typical Properties
The values given in this data sheet describe the typical properties and do not constitute specification limits.
| Amine value: | 7-8 mg KOH/g |
| Acid value: | 13-15 mg KOH/g |
| Density (20℃): | 1.05g/ml |
| Non-volatile matter: | 40% |
| Solvent: | water |
STORAGE AND TRANSPORTATION
Separation and turbidity may occur at temperature below 0℃. Heat to 20 ℃ and mix well before use.
APPLICATION
Industrial coatings
Characters and advantages
The additive deflocculates pigments by steric stabilization. As a result of the small particle sizes of the deflocculated pigments, high levels of gloss can be achieved and the color strength is improved. In addition, the transparency is increased in transparent pigments and the hiding power in opaque pigments. The viscosity of pigment slurry is reduced strongly. In this way, the flow characteristics are also improved and higher pigment loading is possible.
RECOMMENDED ADDITION LEVEL
Additive dosage (as supplied) based on pigment:
| Titanium dioxide powder and Inorganic pigments: | 4-10% |
| Organic pigments: | 30-90% |
| Carbon blacks: | 50-140% |
PROCESSING INSTRUCTIONS
Grinding can be carried out in water and co-solvent. Mix the additive with water and only add the pigments after the additive has been homogeneously and uniformly distributed.
PACKING
25KG Iron drum
180KG Plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
![]()
Our company:
![]()
Our Certifcate&Patents
![]()
![]()
![]()
![]()
![]()