EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
Détails du produit
Lieu d'origine: Chine
Nom de marque: Anjeka
Certification: ISO9001-2015
Numéro de modèle: Je vous en prie.
Conditions de paiement et d'expédition
Quantité de commande min: 25kg/tambour
Détails d'emballage: 25 kg par tambour, 180 kg par tambour
Délai de livraison: 3-5 JOURS
Conditions de paiement: LC, T/T, Western Union
Capacité d'approvisionnement: 100 tonnes/mois
Apparence: |
Liquide translucide |
Point d'ébullition: |
> 100°C |
Densité: |
00,98 à 1,02 g/cm3 |
Point d'éclair: |
> 100°C |
Viscosité: |
1,399-1,409 (25°C) |
Composition involontaire: |
99% |
Indice de réfraction: |
1,399-1,409 (25°C) |
Température de stockage: |
>5°C |
Apparence: |
Liquide translucide |
Point d'ébullition: |
> 100°C |
Densité: |
00,98 à 1,02 g/cm3 |
Point d'éclair: |
> 100°C |
Viscosité: |
1,399-1,409 (25°C) |
Composition involontaire: |
99% |
Indice de réfraction: |
1,399-1,409 (25°C) |
Température de stockage: |
>5°C |
Anjeka 5680A is a foam inhibitor and defoamer for high solids, high film thickness epoxy floor coatings and screen inks and UV light curing coatings.
Chemical composition: polysiloxane compound containing hydrophobic particles.
The figures given on this data page are typical values and are not technical indicate of the product.
| Appearance | Translucent liquid |
| Density g/cm³ (23°C) | 0.98 - 1.02 |
| Involatile composition %. | 99 |
| Refractive index | 1.399-1.409 ( 25°C) |
Delamination may occur at temperatures below 5 °C. Hence heat to 20 °C and mix thoroughly before use.
Storage time of more than 12 months is not recommended.
The full effect of defoamer can only be obtained 24 hours after it is put into the system.
Industrial coatings
Features and Benefits.
Anjeka5680A is an excellent foam inhibitor and defoamer, which has good inhibition and elimination effect on foam generated during the manufacturing and construction of high solid and solvent-free epoxy floor coatings. And also, it has a good inhibiting effect on foam of high viscosity, high film thickness, and especially for solvent-free high film thickness epoxy floor coating.
Additives & Instruments
Epoxy floor coatings, screen inks, UV inks.
0.01 - 1.0%Additive dosage (in purchased form) based on total formulation.
The above figures are empirical and the optimum dosage should be determined through a series of experiments.
The product added before grinding or mixing has the best foam inhibition effect. And it can also be added after grinding, but it must be stirred evenly.
![]()
![]()
![]()
![]()
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity
of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.
![]()