Mettre en évidence:
polymeric dispersant for inorganic pigments
, dispersant for low-polar ester solvents
, ANJEKA 6042B pigment filler dispersant
GENERAL DESCRIPTION
It is suitable for dispersing inorganic pigment fillers, organic pigments and carbon black in low-polar ester solvents such as dibutyl phthalate and dioctyl terephthalate.
PRODUCT DATA
Chemical composition: Highly branched polymer solution.
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not product specifications.
Appearance Light yellow to brown liquid
Acid value (mg KOH/g) 2-40
Amine value (mg KOH/g) 2-40
Density g/cm³ (23℃) 0.80-1.10
Viscosity cps (25℃) 100-1000
Active ingredient (%) 100
STORAGE and TRANSPORT
Please stir well before use, delamination or turbidity may occur when the temperature is lower than 0℃, it should be heated to 30℃-40℃ and stirred well before use.
APPLICATION GUIDELINES
Characteristics and advantages:
Anjeka-6402B can be used to disperse inorganic pigment fillers, organic pigments and carbon blacks in low-polarity ester solvents. It helps to shorten the grinding time of slurries and increase productivity. The additive reduces the viscosity of the milled slurry, which improves flow and allows for higher pigment additions. The additive unflocates and stabilizes pigments through spatial site resistance. Due to the small size of the deflocculated pigment particles, gloss, color strength, transparency and hiding power of the coating can be increased.
APPLICATION SECTORS
This additive is recommended for dispersing inorganic pigment fillers, organic pigments and carbon blacks in low polarity ester solvents.
RECOMMENDED LEVELS
The amount of additive (in purchased form) is based on the pigment:
Titanium dioxide: 5%-10%
Inorganic pigments: 5%-20
Organic pigments: 20%-60
Carbon black: 50%-80
The optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
In order to obtain the best performance, the additive should be added to the abrasive first, mixed well and then added to the colorant.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
Our service
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Votre message doit contenir entre 20 et 3 000 caractères!
