Mettre en évidence:
Composition chimique: |
Mélanges de copolymérisation contenant des groupes acides |
apparence: |
liquide brun |
Point d'ébullition: |
> 100°C |
Description chimique: |
Dispersant mouillant et réducteur de viscosité haute performance pour charges inorganiques |
Densité: |
10,12 à 1,22 g/cm3 |
Odeur: |
Légère odeur caractéristique |
Viscosité: |
200-500 mPa.s |
baisse de viscosité élevée: |
Oui |
Pour les charges de pigments inorganiques: |
Oui |
GENERAL DESCRIPTION
Anjeka-6910A is a wetting and dispersing additive for unsaturated polyester and epoxy systems. It stabilizes inorganic pigments, especially titanium dioxide, and significantly reduces the viscosity and improves the flow of the mixture.
PRODUCT DATA
Chemical composition: Copolymerization blends containing acidic groups
Typical Physical and Chemical Data:
The data given on this data sheet are typical values and are not product specifications.
Appearance: Brown liquid
Acid value (mg KOH/g): 100-300
Density g/cm³ (23℃): 1.10-1.30
Viscosity cps (25℃): 100-800
Active ingredient (%): 100
STORAGE AND TRANSPORT
Delamination or turbidity may occur at temperatures below 10℃, and can be recovered by heating to 30℃-40℃.
Storage time is not recommended to exceed 12 months.
APPLICATION MESSAGE
This additive is recommended for solvent-borne and solvent-free systems to stabilize inorganic pigments, especially titanium dioxide. It effectively reduces the viscosity of the system and improves the fluidity of the system.
RECOMMENDED LEVELS
Dosage of additives: (W/W) based on inorganic fillers or pigments 0.5%-1%.
The above data are empirical, the optimum dosage should be determined through a series of tests.
INCORPORATION AND PROCESSING INSTRUCTIONS
For best performance, add the dispersant to the resin first and then add the filler or pigment.
PACKAGING
-25kg iron drum with inner coating
-200kg ring plastic drum
Our service:
| 1. Reply within 24 hours. |
| 2. High-quality products and reasonable price |
| 3.R&D technology support. |
| 4. Professional team service |
| 5. Customiszed production for different package |
| 6. No delay on shipment |
Our team:
Our company:
We are building a new large-scale production base
strategically located in Hubei Province,with annual production capacity of 6000 tonnes of Interface additives project settled in Songzi chemical park in November 2022.
Benefits to our customers and collaboration partners:
• stable large-scale production, better quality control
• lower production unit cost
Collaboration Opportunities:
• contract manufacturing and OEM/ODM collaboration opportunities
Our Certifcate&Patents
Votre message doit contenir entre 20 et 3 000 caractères!
